User Tools

Site Tools


en:hsmodem:streaming_beacon

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:hsmodem:streaming_beacon [2021/03/28 19:14]
127.0.0.1 external edit
en:hsmodem:streaming_beacon [2022/05/16 01:05] (current)
dj0abr [Receiving the QO-100 multimedia beacon]
Line 20: Line 20:
  
 If you want to receive the beacon and see the information, do the following: If you want to receive the beacon and see the information, do the following:
-  - Tune the receiver with HS modem running to the beacon (e.g. 10489.580 MHz)+  - Tune the receiver with HS modem running to the beacon
   - Set the HS modem to 8APSK - 7200 bps   - Set the HS modem to 8APSK - 7200 bps
   - check that your RX filter bandwidth is at maximum (3.2kHz or even more), HSmodem has its own filters and does not need additional filters in the receiver.   - check that your RX filter bandwidth is at maximum (3.2kHz or even more), HSmodem has its own filters and does not need additional filters in the receiver.
en/hsmodem/streaming_beacon.txt ยท Last modified: 2022/05/16 01:05 by dj0abr