User Tools

Site Tools


en:plutotrx:config

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
en:plutotrx:config [2021/06/17 01:33]
dj0abr [Image size]
en:plutotrx:config [2021/08/22 14:11]
dj0abr [Language]
Line 26: Line 26:
 Usually you will use a USB sound card, there are also comfortable headsets with integrated sound card. In the lists "Loudspeaker" and "Microphone" you select the suitable audio device. Usually you will use a USB sound card, there are also comfortable headsets with integrated sound card. In the lists "Loudspeaker" and "Microphone" you select the suitable audio device.
  
-//**Note about Raspberry-OS**: with this operating system a real chaos of audio devices is output. No matter what USB device you use, with Rasperry-OS you should always choose the top selection: "**Playback/Recording through pulseaudio sound server**".+//**Note about Raspberry-OS and Odroid-Ubuntu**: with this operating system a real chaos of audio devices is output. No matter what USB device you use, with Rasperry-OS you should always choose the top selection: "**Playback/Recording through pulseaudio sound server**".
  
 Then open the audio mixer via the button "MIXER" ("pavucontrol": is already installed) and do the assignment of the audio devices here. The volume can also be set here.  Then open the audio mixer via the button "MIXER" ("pavucontrol": is already installed) and do the assignment of the audio devices here. The volume can also be set here. 
Line 99: Line 99:
  
 to set the language of the user interface to set the language of the user interface
 +
 +==== QSO Auto Sync ====
 +
 +If this function is activated the following happens:
 +
 +If you click on a QSO track in the "upper" waterfall, the QO100 transceiver tries to push this signal into the listening range (0 - 3kHz). The catch range is approx. +/- 6kHz. 
 +
 +After 2 seconds this function switches off automatically.
 +
 +This works sometimes better and sometimes worse, after the auto adjust you can still make a fine adjustment.
  
 ==== Image size ==== ==== Image size ====
en/plutotrx/config.txt ยท Last modified: 2021/09/18 18:32 by dj0abr