Differences

This shows you the differences between two versions of the page.

--- en:plutoconverter:overview [2022/04/04 12:14]
dj0abr [Connection]
+++ en:plutoconverter:overview [2022/04/04 12:19]
dj0abr [Program start]
@@ Line 80: / Line 80: @@
 the output power of the Pluto, adjustable from -40 to 0 dBm. If you have installed a PTT switch via GPO0 and GPO1, this value must be between -25 and 0 dBm, otherwise the PTT will not be switched.
 <code>
-TX_GAIN -5
+TX_GAIN 0
 </code>
@@ Line 110: / Line 110: @@
 TX_FREQ 435.450
 RX_FREQ 739.450
-TX_GAIN -5
+TX_GAIN 0
 SAMPLE RATE 1.2
 TX_BANDWIDTH 1
@@ Line 130: / Line 130: @@
 </code>
-operating data that should be checked is displayed on the screen. If there is no error message, the Pluto downconverter is active and you should have reception.
+The configuration data displayed on the screen should be verified. If there is no error message, the Pluto downconverter is active and you should have reception.
 The first QSO with a Pluto downconverter and an IC9700 took place on April 3, 2022 between PA0EKE and DJ0ABR.

Satellite Wiki