Differences

This shows you the differences between two versions of the page.

--- en:plutotrx:config [2021/06/28 15:27]
dj0abr [Audio settings]
+++ en:plutotrx:config [2021/09/18 18:30]
dj0abr
@@ Line 13: / Line 13: @@
 To do this, click on "SETUP" {{:de:plutotrx:c2.png?30|}} in the lower right corner. The setup window will open:
-{{:de:plutotrx:ss1en.png?900|}}
+{{:de:plutotrx:trxsetupen.png?900|}}
 **Pluto:** the Pluto can be connected directly via USB cable, in this case select "local USB".
@@ Line 99: / Line 99: @@
 to set the language of the user interface
+==== QSO Auto Sync ====
+If this function is activated the following happens:
+If you click on a QSO track in the "upper" waterfall, the QO100 transceiver tries to push this signal into the listening range (0 - 3kHz). The catch range is approx. +/- 6kHz.
+After 2 seconds this function switches off automatically.
+This works sometimes better and sometimes worse, after the auto adjust you can still make a fine adjustment.
 ==== Image size ====

Satellite Wiki