en:plutotrx:raspi
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
en:plutotrx:raspi [2021/07/18 15:09] dj0abr |
en:plutotrx:raspi [2021/08/30 18:58] (current) dj0abr [Image] |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| * the Pluto can be connected via USB or alternatively via ETH/USB adapter, but the operation should then be done via Ethernet cable. The data rate is just under 20Mbit/s which is too fast for most wlans. | * the Pluto can be connected via USB or alternatively via ETH/USB adapter, but the operation should then be done via Ethernet cable. The data rate is just under 20Mbit/s which is too fast for most wlans. | ||
| * tested Pluto versions: Rev.B, Rev.C with original software or with F5OEO software, as of 2019 or 2021. | * tested Pluto versions: Rev.B, Rev.C with original software or with F5OEO software, as of 2019 or 2021. | ||
| - | |||
| - | ===== Image ===== | ||
| - | |||
| - | If you want to have a ready image for the SD card (country setting: German), you can get it here: | ||
| - | |||
| - | Version: V1.67 | ||
| - | |||
| - | [[https:// | ||
| - | |||
| - | Username: pi\\ | ||
| - | Password: qo100trx | ||
en/plutotrx/raspi.txt ยท Last modified: 2021/08/30 18:58 by dj0abr
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
